CCNA Routing and Switching
Routing and Switching Essentials
Practice Skills Assessment – Packet Tracer
A few things to keep in mind while completing this activity:
- Do not use the browser Back button or close or reload any exam windows during the exam.
- Do not close Packet Tracer when you are done. It will close automatically.
- Click the Submit Assessment button in the browser window to submit your work.
Introduction
In this practice skills assessment, you will configure the XYZ Corporation
network with single-area OSPFv2. In addition, you will configure
router-on-a-stick routing between VLANs. You will also implement NAT,
DHCP and access lists.
All IOS device configurations should be completed from a direct terminal connection to the device console.
Some values that are required to complete the configurations have not been
given to you. In those cases, create the values that you need to
complete the requirements. These values may include certain IP
addresses, passwords, interface descriptions, banner text, and other
values.
For the sake of time, many repetitive but important
configuration tasks have been omitted from this activity. Many of these
tasks, especially those related to device security, are essential
elements of a network configuration. The intent of this activity is not
to diminish the importance of full device configurations.
You will practice and be assessed on the following skills:
- Configuration of initial device settings
- IPv4 address assignment
- Configuration and addressing of router interfaces
- Configuration of a router as a DHCP server
- Implementation of static and dynamic NAT
- Configuration of the single-area OSPFv2 routing protocol
- Configuration of a default route and static summary routes
- Configuration of VLANs and trunks
- Configuration of routing between VLANs
- Configuration of ACL to limit device access
You are required to configure the following:
Site 1:
- Configuration of initial router settings
- Interface configuration and IPv4 addressing
- Configuration of DHCP
- Configuration of single-area OSPFv2
- Configuration of routing between VLANs
HQ:
- Interface configuration and IPv4 addressing
- Configuration of single-area OSPFv2
- Configuration of IPv4 route summarization
- Configuration and propagation of a default route
- Configuration of static summary routes
- Configuration of static and dynamic NAT
- Configuration of ACLs
Site 2:
- Interface configuration and IPv4 addressing
- Configuration of single-area OSPFv2
- Configuration of a static summary route
Site1-SW1:
- Configuration of VLANs
- Assignment of switch ports to VLANs
- Configuration of trunking
- Configuration of unused switch ports
Site1-SW2:
- Configuration of VLANs
- Assignment of switch ports to VLANs
- Configuration of trunking
- Configuration of unused switch ports
Internal PC hosts:
- Configuration as DHCP clients
Addressing Tables
Note: You are provided with the networks that interfaces should be configured
on. Unless you are told to do differently in the detailed instructions
below, you are free to choose the host addresses to assign.
Addressing Table:
| Device | Interface | Network | Comments |
| Site 1 | S0/0/0 | 192.168.10.104/30 | any address in the network |
| Gi0/0.45 | 192.168.45.0/24 | first address in the network | |
| Gi0/0.47 | 192.168.47.0/24 | first address in the network | |
| Gi0/0.101 | 192.168.101.0/24 | first address in the network | |
| HQ | S0/0/0 | 192.168.10.104/30 | any address in the network |
| S0/0/1 | 192.168.10.112/30 | any address in the network | |
| S0/1/0 | 198.51.100.0/28 | first address in the network | |
| Gi0/0 | 192.168.18.40/29 | first address in the network | |
| Site 2 | S0/0/0 | 192.168.10.124/30 | second address in the network |
| S0/0/1 | 192.168.10.112/30 | any address in the network | |
| Site1-SW1 | VLAN 101 | 192.168.101.0/24 | any address in the network |
| Site1-SW2 | VLAN 101 | 192.168.101.0/24 | any address in the network |
Pre-configured addresses for reference:
| Device | Address |
| Corporate Web Server | 192.168.18.46/29 |
| Admin Host | 203.0.113.18 |
| Internet Host | 203.0.113.128 |
| Web Server | 209.165.201.235 |
| East Host | 192.168.200.10/24 |
| Central Host | 192.168.201.10/24 |
| West Host | 192.168.202.10/24 |
VLAN Table:
| VLAN Number | VLAN Name | VLAN Network | Device:Port |
| 45 | finance | 192.168.45.0/24 | Site1-SW1:Fa0/10 Site1-SW2: Fa0/3 |
| 47 | sales | 192.168.47.0/24 | Site1-SW1:Fa0/15 Site1-SW2: Fa0/21 |
| 101 | netadmin | 192.168.101.0/24 | SVI |
Instruction
All configurations must be performed through a direct terminal connection to the device consoles.
Step 1: Determine the Addresses to Assign
Determine the IP addresses that you will use for the required interfaces on the
three routers and two switches. Use the information in the Addressing
Table and follow the guidelines below:
Assign the first IP addresses in the networks that are provided in the Addressing Table to the LAN interfaces.
- Assign the first address in the HQ subnet to the interface that is connected to the Internet.
- Assign any valid host address in the networks that are provided in the Addressing Table to the serial interfaces.
- The host PCs will receive IP addresses over DHCP.
Step 2: Configure Site 1
Configure Site 1 with the following:
- Configure the router host name: Site-1
- Prevent the router from attempting to resolve command line entries to IP addresses.
- Protect privileged EXEC mode from unauthorized access with the MD5 encrypted password.
- Prevent device status messages from interrupting command line entries at the device console.
- Secure the router console and terminal lines.
- Prevent all passwords from being viewed in clear text in the device configuration file.
- Configure a message-of-the-day banner.
Step 3: Configure the Router Physical Interfaces
Configure the interfaces of the routers for full connectivity with the following:
IP addresses as shown in the addressing table.
- Describe
the operational Site 1 serial interface. The Site 1 Ethernet
interfaces will be configured at the end of this assessment. - DCE settings where appropriate. Use a rate of 128000.
Step 4: Configure static and default routing
Configure the following static routes:
a. Manually configure default routes to the Internet. Use the exit interface
argument. All hosts on the internal LANs and Branch Network
networks should be able to reach the Internet.b. It has been decided to use static routes to reach the branch networks that
are connected to Site 2. Use a single summary to represent the
branch networks in the most efficient way possible. Configure the
summary static route onHQ and Site 2 using the exit interface argument.
Step 5: Configure OSPF Routing
Configure single-area OSPFv2 to route between all internal networks. The branch networks are not routed with OSPFv2.
Use a process ID of 10.The routers should be configured in area 0.
- Use the correct inverse masks for all network statements. Do not use quad zero masks (0.0.0.0).
Step 6: Customize single-area OSPFv2
Customize single-area OSPFv2 by performing the following configuration tasks:
a. Set the bandwidth of the serial interfaces to 128 kb/s.
b. Configure OSPF router IDs as follows:
- Site 1: 1.1.1.1
- HQ: 2.2.2.2
- Site 2: 3.3.3.3
c. Configure the OSPF cost of the link between Site 1 and HQ to 7500.
d.Prevent routing updates from being sent out of any of the LAN
interfaces that are routed with OSPFv2. Do not use the default keyword
in the commands you use to do this.
Step 7: Configure VLANs and Trunking
Configure Site1-SW1 and Site1-SW2 with VLANs and trunk ports as follows:
a. Configure names for the VLANs. The VLAN names must be configured to match the
names in the VLAN Table exactly (case and spelling). Refer to the VLAN table above for the VLAN numbers and names that should be configured on both switches.b. Configure the ports that link the switches with each other and the Site 1 router as functioning trunk ports.
c. Assign the switch ports shown in the table as access ports in the VLANs as indicated in the VLAN Table.
d. Address
VLAN 101 on the network indicated in the VLAN Table. Note that the
first address in this network will be assigned to the router in a later
step in this assessment. The management interfaces of both switches
should configured to be reachable by hosts on other networks.e. Configure all unused switch ports as access ports, and shutdown the unused ports.
Step 8: Configure DHCP
Site 1 should be configured as a DHCP server that provides addressing to the
hosts attached to Site1-SW1 and Site1-SW2. The requirements are as
follows:
- Use VLAN45 and VLAN47 as the pool names. Note that the pool names must match the names given here exactly, all capital letters and exact spelling.
- Addresses .1 to .20 should be reserved for static assignment from each pool.
- The
first address in each network will be assigned to the router interface
attached to the networks as shown in the addressing table. - Use a DNS server address of 192.168.18.100. This server has not yet been added to the network, but the address must be configured.
- Ensure that hosts in each LAN are able to communicate with hosts on remote networks.
Step 9: Configure NAT
Configure NAT to translate internal private addresses into public addresses for the Internet. The requirements are:
a. Configure static NAT to the Corporate Web Server.
- Translate the internal address of the server to the address 198.51.100.14.
- Configure the correct interfaces to perform this NAT translation.
b. Configure dynamic NAT (not NAT with overload, or PAT).
- Use the addresses remaining in the public address subnet of 198.51.100.0/28.
The first two addresses in the subnet have already been assigned to the
HQ and ISP serial interfaces. Also, another address has already
been used in the static mapping in the step above.- Use a pool name of INTERNET. Note that the pool name must match this name exactly, in spelling and capitalization.
- Hosts on each of the internal LANs shown in the topology and on all of the
branch networks should be permitted to use the NAT addresses to access
the Internet.- Use a source list number of 1.
- Your source list should consist of three entries, one each for the LANs and one for the branch networks.
Step 10: Configure Access Control Lists
You will configure two access control lists to limit device access on
HQ. You should use the any and host keywords in the ACL
statements as required. The ACL requirements are:
a. Restrict access to the vty lines on HQ:
- Create a named standard ACL using the name MANAGE. Be sure that you use this name exactly as it appears in these instructions (case and spelling).
- Allow only the Admin Host to access the vty lines of HQ.
- No other Internet hosts (including Internet hosts not visible in the
topology) should be able to access the vty lines of HQ.- Your solution should consist of a single ACL statement.
b. Allow outside access to the Corporate Web Server while controlling other
traffic from the outside. Create the ACL as directed below:
- Use access list number 101.
- First, allow Admin Host full access to all network hosts and devices.
- Then, allow outside hosts to access the Corporate Web Server over HTTP only.
- Allow traffic that is in response to data requests from the internal and Branch Network hosts to enter the network.
- Add a statement so that counts of all denied traffic will be shown in the show access-lists command output.
- Your ACL should have only four statements.
Your ACL should be placed in the most efficient location possible to conserve network bandwidth and device processing resources.
Step 11: Configure Router-on-a-Stick Inter-VLAN Routing.
Configure Site 1 to provide routing between the VLANs configured on the switches. As follows:
- Use the VLAN numbers for the required interface numbers.
- Use the first addresses in the VLAN networks for the interfaces.
Step 12: Test and Troubleshoot Connectivity.
Ensure that the hosts attached to the VLANs can reach hosts on the
Branch Network. Note: Pings to the Internet hosts will be blocked
by the ACL, however the server should be reachable over HTTP.
—————————————————————————————————————————————-
Answer and Solution
There are three types of topology. Please read instruction carefully before take lab exam and make sure which topology type is yours.
Topology Type A
CCNA 2 v5.02 RSE Practice Skills Assessment – PT_Type A
Step 1
- Copy script on step 2 and past to Notepad
- Copy script from Notepad that you did first step and past to Config Mode(Router(config)#) of network device that own configuration
- To access network device you must use console line
Step 2
- HQ
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname HQ
!
!
ip cef
no ipv6 cef
!
!
license udi pid CISCO1941/K9 sn FTX1524Y7OR
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
ip address 192.168.18.41 255.255.255.248
no sh
ip nat inside
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
bandwidth 128
ip address 192.168.10.105 255.255.255.252
no sh
ip ospf cost 7500
!
interface Serial0/0/1
bandwidth 128
ip address 192.168.10.113 255.255.255.252
no sh
clock rate 128000
!
interface Serial0/1/0
ip address 198.51.100.1 255.255.255.240
no sh
ip access-group 101 in
ip nat outside
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 2.2.2.2
log-adjacency-changes
passive-interface GigabitEthernet0/0
network 192.168.10.104 0.0.0.3 area 0
network 192.168.10.112 0.0.0.3 area 0
network 192.168.18.40 0.0.0.7 area 0
!
ip nat pool INTERNET 198.51.100.3 198.51.100.13 netmask 255.255.255.240
ip nat inside source list 1 pool INTERNET
ip nat inside source static 192.168.18.46 198.51.100.14
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/1/0
ip route 192.168.200.0 255.255.252.0 Serial0/0/1
!
ip flow-export version 9
!
!
access-list 1 permit 192.168.45.0 0.0.0.255
access-list 1 permit 192.168.47.0 0.0.0.255
access-list 1 permit 192.168.200.0 0.0.3.255
ip access-list standard MANAGE
permit host 203.0.113.18
access-list 101 permit ip host 203.0.113.18 any
access-list 101 permit tcp any host 198.51.100.14 eq www
access-list 101 permit tcp any any established
access-list 101 deny ip any any
!
!
line con 0
!
line aux 0
!
line vty 0 4
access-class MANAGE in
password class
login
!
!
end
- Site1
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption
!
hostname Site-1
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
!
!
ip dhcp excluded-address 192.168.45.1 192.168.45.20
ip dhcp excluded-address 192.168.47.1 192.168.47.20
!
ip dhcp pool VLAN45
network 192.168.45.0 255.255.255.0
default-router 192.168.45.1
dns-server 192.168.18.100
ip dhcp pool VLAN47
network 192.168.47.0 255.255.255.0
default-router 192.168.47.1
dns-server 192.168.18.100
!
ip cef
no ipv6 cef
!
license udi pid CISCO1941/K9 sn FTX15245QA9
!
no ip domain-lookup
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
no sh
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.45
description any_text
encapsulation dot1Q 45
ip address 192.168.45.1 255.255.255.0
!
interface GigabitEthernet0/0.47
description any_text
encapsulation dot1Q 47
ip address 192.168.47.1 255.255.255.0
!
interface GigabitEthernet0/0.101
description any_text
encapsulation dot1Q 101
ip address 192.168.101.1 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
description any_text
bandwidth 128
ip address 192.168.10.105 255.255.255.252
ip ospf cost 7500
clock rate 128000
no sh
!
interface Serial0/0/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 1.1.1.1
log-adjacency-changes
passive-interface GigabitEthernet0/0.45
passive-interface GigabitEthernet0/0.47
passive-interface GigabitEthernet0/0.101
network 192.168.10.104 0.0.0.3 area 0
network 192.168.45.0 0.0.0.255 area 0
network 192.168.47.0 0.0.0.255 area 0
network 192.168.101.0 0.0.0.255 area 0
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0/0
!
ip flow-export version 9
!
banner motd ^C
Any banner text.^C
!
line con 0
password 7 0822404F1A0A
logging synchronous
login
!
line aux 0
!
line vty 0 4
password 7 0822404F1A0A
login
!
!
end
- Site2
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Site-2
!
!
ip cef
no ipv6 cef
!
!
license udi pid CISCO1941/K9 sn FTX15248687
!
!
spanning-tree mode pvst
!
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
ip address 192.168.10.126 255.255.255.252
no sh
!
interface Serial0/0/1
bandwidth 128
ip address 192.168.10.114 255.255.255.252
no sh
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 3.3.3.3
log-adjacency-changes
redistribute static
network 192.168.10.112 0.0.0.3 area 0
!
ip classless
ip route 192.168.200.0 255.255.252.0 Serial0/0/0
ip route 0.0.0.0 0.0.0.0 Serial0/0/1
!
ip flow-export version 9
!
line con 0
!
line aux 0
!
line vty 0 4
password class
login
!
!
end
- Site1-SW1
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Site1-SW1
!
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode access
shutdown
!
interface FastEthernet0/2
switchport mode access
shutdown
!
interface FastEthernet0/3
switchport mode access
shutdown
!
interface FastEthernet0/4
switchport mode access
shutdown
!
interface FastEthernet0/5
switchport mode access
shutdown
!
interface FastEthernet0/6
switchport mode access
shutdown
!
interface FastEthernet0/7
switchport mode access
shutdown
!
interface FastEthernet0/8
switchport mode access
shutdown
!
interface FastEthernet0/9
switchport mode access
shutdown
!
interface FastEthernet0/10
switchport access vlan 45
switchport mode access
no sh
!
interface FastEthernet0/11
switchport mode access
shutdown
!
interface FastEthernet0/12
switchport mode access
shutdown
!
interface FastEthernet0/13
switchport mode access
shutdown
!
interface FastEthernet0/14
switchport mode access
shutdown
!
interface FastEthernet0/15
switchport access vlan 47
switchport mode access
no sh
!
interface FastEthernet0/16
switchport mode access
shutdown
!
interface FastEthernet0/17
switchport mode access
shutdown
!
interface FastEthernet0/18
switchport mode access
shutdown
!
interface FastEthernet0/19
switchport mode access
shutdown
!
interface FastEthernet0/20
switchport mode access
shutdown
!
interface FastEthernet0/21
switchport mode access
shutdown
!
interface FastEthernet0/22
switchport mode access
shutdown
!
interface FastEthernet0/23
switchport mode access
shutdown
!
interface FastEthernet0/24
switchport mode access
shutdown
!
interface GigabitEthernet0/1
switchport mode trunk
no sh
!
interface GigabitEthernet0/2
switchport mode trunk
no sh
!
interface Vlan1
no ip address
shutdown
!
interface Vlan101
ip address 192.168.101.10 255.255.255.0
!
ip default-gateway 192.168.101.1
!
!
vl 45
na finance
vl 47
na sales
vl 101
na netadmin
!
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
!
end
- Site1-SW2
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Site1-SW2
!
!
!
!
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode access
shutdown
!
interface FastEthernet0/2
switchport mode access
shutdown
!
interface FastEthernet0/3
switchport access vlan 45
switchport mode access
no sh
!
interface FastEthernet0/4
switchport mode access
shutdown
!
interface FastEthernet0/5
switchport mode access
shutdown
!
interface FastEthernet0/6
switchport mode access
shutdown
!
interface FastEthernet0/7
switchport mode access
shutdown
!
interface FastEthernet0/8
switchport mode access
shutdown
!
interface FastEthernet0/9
switchport mode access
shutdown
!
interface FastEthernet0/10
switchport mode access
shutdown
!
interface FastEthernet0/11
switchport mode access
shutdown
!
interface FastEthernet0/12
switchport mode access
shutdown
!
interface FastEthernet0/13
switchport mode access
shutdown
!
interface FastEthernet0/14
switchport mode access
shutdown
!
interface FastEthernet0/15
switchport mode access
shutdown
!
interface FastEthernet0/16
switchport mode access
shutdown
!
interface FastEthernet0/17
switchport mode access
shutdown
!
interface FastEthernet0/18
switchport mode access
shutdown
!
interface FastEthernet0/19
switchport mode access
shutdown
!
interface FastEthernet0/20
switchport mode access
shutdown
!
interface FastEthernet0/21
switchport access vlan 47
switchport mode access
no sh
!
interface FastEthernet0/22
switchport mode access
shutdown
!
interface FastEthernet0/23
switchport mode access
shutdown
!
interface FastEthernet0/24
switchport mode access
shutdown
!
interface GigabitEthernet0/1
switchport mode trunk
no sh
!
interface GigabitEthernet0/2
shutdown
!
interface Vlan1
no ip address
shutdown
!
interface Vlan101
ip address 192.168.101.15 255.255.255.0
!
ip default-gateway 192.168.101.1
!
!
vl 45
na finance
vl 47
na sales
vl 101
na netadmin
!
!
line con 0
!
line vty 0 4
pas class
login
line vty 5 15
pas class
login
!
!
end
Step 3
- Enable DHCP client on
- Manage-1a
- Accts-2f
- Sec-2c
- Clerk-1c
———————————————————————————–
Topology Type B
CCNA 2 v5.02 RSE Practice Skills Assessment – PT_Type_B
Step 1
- Copy script on step 2 and past to Notepad
- Copy script from Notepad that you did first step and past to Config Mode(Router(config)#) of network device that own configuration
- To access network device you must use console line
Step 2
- Central
Current configuration : 1897 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Central
!
ip cef
no ipv6 cef
!
license udi pid CISCO1941/K9 sn FTX1524Y7OR
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
ip address 192.168.18.41 255.255.255.248
no sh
ip nat inside
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
bandwidth 128
ip address 192.168.10.105 255.255.255.252
no sh
ip ospf cost 7500
!
interface Serial0/0/1
bandwidth 128
ip address 192.168.10.113 255.255.255.252
no sh
clock rate 128000
!
interface Serial0/1/0
ip address 198.51.100.1 255.255.255.240
no sh
ip access-group 101 in
ip nat outside
!
interface Serial0/1/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 2.2.2.2
log-adjacency-changes
passive-interface GigabitEthernet0/0
network 192.168.10.104 0.0.0.3 area 0
network 192.168.10.112 0.0.0.3 area 0
network 192.168.18.40 0.0.0.7 area 0
!
ip nat pool INTERNET 198.51.100.3 198.51.100.13 netmask 255.255.255.240
ip nat inside source list 1 pool INTERNET
ip nat inside source static 192.168.18.46 198.51.100.14
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/1/0
ip route 192.168.200.0 255.255.252.0 Serial0/0/1
!
ip flow-export version 9
!
access-list 1 permit 192.168.45.0 0.0.0.255
access-list 1 permit 192.168.47.0 0.0.0.255
access-list 1 permit 192.168.200.0 0.0.3.255
ip access-list standard MANAGE
permit host 203.0.113.18
access-list 101 permit ip host 203.0.113.18 any
access-list 101 permit tcp any host 198.51.100.14 eq www
access-list 101 permit tcp any any established
access-list 101 deny ip any any
!
line con 0
!
line aux 0
!
line vty 0 4
access-class MANAGE in
password class
login
!
end
- Police
Current configuration : 2050 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
service password-encryption
!
hostname PoliceDept
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
!
ip dhcp excluded-address 192.168.45.1 192.168.45.20
ip dhcp excluded-address 192.168.47.1 192.168.47.20
!
ip dhcp pool VLAN45
network 192.168.45.0 255.255.255.0
default-router 192.168.45.1
dns-server 192.168.18.100
ip dhcp pool VLAN47
network 192.168.47.0 255.255.255.0
default-router 192.168.47.1
dns-server 192.168.18.100
!
ip cef
no ipv6 cef
!
license udi pid CISCO1941/K9 sn FTX15245QA9
!
no ip domain-lookup
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
no sh
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.45
description any_text
encapsulation dot1Q 45
ip address 192.168.45.1 255.255.255.0
!
interface GigabitEthernet0/0.47
description any_text
encapsulation dot1Q 47
ip address 192.168.47.1 255.255.255.0
!
interface GigabitEthernet0/0.101
description any_text
encapsulation dot1Q 101
ip address 192.168.101.1 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
description any_text
bandwidth 128
ip address 192.168.10.105 255.255.255.252
ip ospf cost 7500
clock rate 128000
no sh
!
interface Serial0/0/1
no ip address
clock rate 2000000
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 1.1.1.1
log-adjacency-changes
passive-interface GigabitEthernet0/0.45
passive-interface GigabitEthernet0/0.47
passive-interface GigabitEthernet0/0.101
network 192.168.10.104 0.0.0.3 area 0
network 192.168.45.0 0.0.0.255 area 0
network 192.168.47.0 0.0.0.255 area 0
network 192.168.101.0 0.0.0.255 area 0
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0/0
!
ip flow-export version 9
!
banner motd ^C
Any banner text.^C
!
line con 0
password 7 0822404F1A0A
logging synchronous
login
!
line aux 0
!
line vty 0 4
password 7 0822404F1A0A
login
!
end
- Fire
Current configuration : 980 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Fire
!
ip cef
no ipv6 cef
!
license udi pid CISCO1941/K9 sn FTX15248687
!
spanning-tree mode pvst
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/0/0
ip address 192.168.10.126 255.255.255.252
no sh
!
interface Serial0/0/1
bandwidth 128
ip address 192.168.10.114 255.255.255.252
no sh
!
interface Vlan1
no ip address
shutdown
!
router ospf 10
router-id 3.3.3.3
log-adjacency-changes
redistribute static
network 192.168.10.112 0.0.0.3 area 0
!
ip classless
ip route 192.168.200.0 255.255.252.0 Serial0/0/0
ip route 0.0.0.0 0.0.0.0 Serial0/0/1
!
ip flow-export version 9
!
line con 0
!
line aux 0
!
line vty 0 4
password class
login
!
end
- Police-SW1
Current configuration : 2038 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Police-SW1
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode access
shutdown
!
interface FastEthernet0/2
switchport mode access
shutdown
!
interface FastEthernet0/3
switchport mode access
shutdown
!
interface FastEthernet0/4
switchport mode access
shutdown
!
interface FastEthernet0/5
switchport mode access
shutdown
!
interface FastEthernet0/6
switchport mode access
shutdown
!
interface FastEthernet0/7
switchport mode access
shutdown
!
interface FastEthernet0/8
switchport mode access
shutdown
!
interface FastEthernet0/9
switchport mode access
shutdown
!
interface FastEthernet0/10
switchport access vlan 45
switchport mode access
no sh
!
interface FastEthernet0/11
switchport mode access
shutdown
!
interface FastEthernet0/12
switchport mode access
shutdown
!
interface FastEthernet0/13
switchport mode access
shutdown
!
interface FastEthernet0/14
switchport mode access
shutdown
!
interface FastEthernet0/15
switchport access vlan 47
switchport mode access
no sh
!
interface FastEthernet0/16
switchport mode access
shutdown
!
interface FastEthernet0/17
switchport mode access
shutdown
!
interface FastEthernet0/18
switchport mode access
shutdown
!
interface FastEthernet0/19
switchport mode access
shutdown
!
interface FastEthernet0/20
switchport mode access
shutdown
!
interface FastEthernet0/21
switchport mode access
shutdown
!
interface FastEthernet0/22
switchport mode access
shutdown
!
interface FastEthernet0/23
switchport mode access
shutdown
!
interface FastEthernet0/24
switchport mode access
shutdown
!
interface GigabitEthernet0/1
switchport mode trunk
no sh
!
interface GigabitEthernet0/2
switchport mode trunk
no sh
!
interface Vlan1
no ip address
shutdown
!
interface Vlan101
ip address 192.168.101.10 255.255.255.0
!
ip default-gateway 192.168.101.1
!
vl 45
na HR
vl 47
na records
vl 101
na comm
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
end
- Police-SW2
Current configuration : 2025 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Police-SW2
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport mode access
shutdown
!
interface FastEthernet0/2
switchport mode access
shutdown
!
interface FastEthernet0/3
switchport access vlan 45
switchport mode access
no sh
!
interface FastEthernet0/4
switchport mode access
shutdown
!
interface FastEthernet0/5
switchport mode access
shutdown
!
interface FastEthernet0/6
switchport mode access
shutdown
!
interface FastEthernet0/7
switchport mode access
shutdown
!
interface FastEthernet0/8
switchport mode access
shutdown
!
interface FastEthernet0/9
switchport mode access
shutdown
!
interface FastEthernet0/10
switchport mode access
shutdown
!
interface FastEthernet0/11
switchport mode access
shutdown
!
interface FastEthernet0/12
switchport mode access
shutdown
!
interface FastEthernet0/13
switchport mode access
shutdown
!
interface FastEthernet0/14
switchport mode access
shutdown
!
interface FastEthernet0/15
switchport mode access
shutdown
!
interface FastEthernet0/16
switchport mode access
shutdown
!
interface FastEthernet0/17
switchport mode access
shutdown
!
interface FastEthernet0/18
switchport mode access
shutdown
!
interface FastEthernet0/19
switchport mode access
shutdown
!
interface FastEthernet0/20
switchport mode access
shutdown
!
interface FastEthernet0/21
switchport access vlan 47
switchport mode access
no sh
!
interface FastEthernet0/22
switchport mode access
shutdown
!
interface FastEthernet0/23
switchport mode access
shutdown
!
interface FastEthernet0/24
switchport mode access
shutdown
!
interface GigabitEthernet0/1
switchport mode trunk
no sh
!
interface GigabitEthernet0/2
shutdown
!
interface Vlan1
no ip address
shutdown
!
interface Vlan101
ip address 192.168.101.15 255.255.255.0
!
ip default-gateway 192.168.101.1
!
vl 45
na HR
vl 47
na records
vl 101
na comm
!
line con 0
!
line vty 0 4
pas class
login
line vty 5 15
pas class
login
!
end
Step 3
- Enable DHCP PC client on
- Police 1
- Police 2
- Fire 1
- Fire 2
No comments:
Post a Comment